Victron BlueSolar PWM-Pro Charge Controller 12/24V-20A
Part number SCC010020110 · Victron Energy
On order
$76.00 per each
Freight is quoted with the order.
0 in your cart View cart
What it does
BlueSolar PWM-Pro
Specification
| Battery voltage | 12V / 24V (automatic detection) |
|---|---|
| Rated charge current | 20 A |
| Automatic load disconnect | true |
| Max solar voltage | 28V / 55V |
| Pv array12v | Solar panel with 36 cells |
| Pv array24v | Solar panel with 72 cells,Two solar panles with 36 cells in series |
| Self consumption | 10 mA |
| Load output | Manual control + low voltage disconnect |
| Protections | Battery reverse polarity (fuse),Output short-circuit,Excessive temperature |
| Temperature sensor | Yes, optional (artice SCC940100100) |
| Temperature compensation | -30 mV / °C resp. -60 mV / °C (if temperature sensor installed) |
| Remote panel | Optional (article SCC900300000) |
| Grounding | Common positive |
| Operating temp range | -20 to 50 °C |
| Max humidity | 98 % |
| Charge voltage absorption | 14.4V / 28.8V |
| Charge voltage float | 13.8V / 27.6V |
| Charge voltage equalization | 14.6V / 29.2V |
| Low voltage load disconnect | 11.1V / 22.2V |
| Low voltage load reconnect | 12.6V / 25.2V |
| Battery connection terminal type | Screw terminals 10 mm² (8 AWG) |
| PV connection terminal type | Screw terminals 10 mm² (8 AWG) |
| Load connection terminal type | Screw terminals 10 mm² (8 AWG) |
| Colour | Grey |
| Protection category | IP30 |
| Weight | 0.3 kg |
| Height | 160 mm |
| Width | 82 mm |
| Depth | 48 mm |
| Safety | EN-IEC 62109-1 |