Victron GX IO-Extender 150
Part number BPP900800150 · Victron Energy
On order
$125.00 per each
Freight is quoted with the order.
0 in your cart View cart
Documents
What it does
The GX IO-Extender 150 enhances the input and output (I/O) capabilities of a GX device, enabling seamless integration with additional sensors, controls, and external devices. It connects via USB, which also serves as its power source, providing a simple and efficient expansion solution. The device can be controlled using Node-RED on the GX device as well as the Switch pane in the user interface.
Specification
| Supply voltage | Powered by USB |
|---|---|
| Power consumption | <100 mW when idle, max. 1 W (<200 mA @ 5 V) |
| Mounting | Wall or DIN rail 35mm (optiona ac |
| Operating temp range | -20 to 50 °C |
| Ve direct | No |
| Ve bus | No |
| Ve can | No |
| Bms can | No |
| Bluetooth | No |
| Ethernet | No |
| Wifi | No |
| Usb | Yes |
| Micro sd card slot | No |
| Cellular | No |
| Antenna | No |
| Factory sim | No |
| Custom sim | No |
| Resistive tank level inputs | 0 |
| Temperature sense input | 0 |
| Digital inputs | 8 |
| Digital io | 8 I/Os with LEDs indicating state, configurable as 8 inputs, 8 outputs or 4 inputs + 4 outputs - Inputs: 3.8 to 5.5 V, Outputs: 5 V, 4 mA max - The digital i/Os are capable to handle voltages up to 5.5 V. Any over voltage can cause permanent damage |
| Pwm output | 4 channels with LEDs indicating the state - Voltage level: 5 V, Precision 8 bits @ 1,5625 kHz |
| Latching relays | Contact rating (resistive load): DC: 3 A @ 30 V, 1 A @ 60 V, 0,3 A @ 220 V (90 W max) - AC: 2 A @ 60 V, 1 A @ 125 V, 0,5 A @ 250 V (125 VA max) |
| Solid switch | Max battery voltage: 70 VDC - Max load current: 4 A - Max capacitive load: Vbat up to 15 V: 1000 uF, 15 V<Vbat<30 V: 400 uF, 30 V<Vbat<70 V: 50 uF - Max inductive load: Up tp 1 A: 1000 mH, 1 A<I<2 A: 100 mH, More than 2 A: 10 mH |
| Relays | 2 |
| Colour | Blue (RAL 5012) |
| Protection category | IP20 |
| Height | 123 mm |
| Width | 67 mm |
| Depth | 23 mm |