Victron MultiPlus-II 48/5000/70-95 120V (UL 1741)

Remote panel: Digital Multi Control 200/200A GX: Victron Digital Multi Control 200/200A GX (Right Angle RJ45) Retail $130.00 each

Wall-mounted remote: turn the inverter/charger on, off or charger-only, and set the shore power current limit from inside the vehicle or building. Connects with an RJ45 UTP cable (below).

Wall mount box for the Digital Multi Control: Victron Wall mounted enclosure for 65 x 120 mm GX-panels $25.00 each

Surface-mount enclosure for the Digital Multi Control (65 x 120 mm GX panel), when you don't want to cut a hole in the wall.

RJ45 UTP cable, 0.3 m (1 ft): Victron RJ45 UTP Cable 0,3 m $8.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 0.9 m (3 ft): Victron RJ45 UTP Cable 0,9 m $8.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 1.8 m (6 ft): Victron RJ45 UTP Cable 1,8 m $12.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 3 m (10 ft): Victron RJ45 UTP Cable 3 m $13.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 5 m (16 ft): Victron RJ45 UTP Cable 5 m $17.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 10 m (33 ft): Victron RJ45 UTP Cable 10 m $21.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 15 m (49 ft): Victron RJ45 UTP Cable 15 m $29.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 20 m (66 ft): Victron RJ45 UTP Cable 20 m $39.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

RJ45 UTP cable, 30 m (98 ft): Victron RJ45 UTP Cable 30 m $37.00 each

VE.Bus cable: connects this inverter/charger to a Digital Multi Control, Cerbo GX or another VE.Bus unit.

Programming interface: MK3-USB-C: Victron Interface MK3-USB-C (VE.Bus to USB-C) $66.00 each

Needed to program (configure) the inverter/charger from a laptop, or a phone or tablet with a USB-C port, using VictronConnect or VEConfigure. Plugs into the VE.Bus port with an RJ45 UTP cable. Systems with a Cerbo GX or Ekrano GX can usually be programmed through the GX device instead, including remotely through VRM.

Programming interface: MK3-USB (USB-A): Victron Interface MK3-USB (VE.Bus to USB) $76.00 each

Same as the MK3-USB-C, with a standard USB-A plug for a laptop or computer. Needed to program (configure) the inverter/charger. Systems with a Cerbo GX or Ekrano GX can usually be programmed through the GX device instead.

VE.Bus Smart dongle (Bluetooth): Victron VE.Bus Smart dongle $94.00 each

Adds Bluetooth for monitoring and on/off control from the VictronConnect app, and can stay connected permanently. It cannot program (configure) the inverter/charger: use an MK3-USB interface or a GX device for that.